Geometric Wolf Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: [https://buymeacoffee.com/heyben](https://buymeacoffee.com/heyben)

Geometric Wolf Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1.1mm
The Max Depth is 4mm and the Actual Depth is 4.1mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.2
    PLA BambuLab Basic Brown Transmission Distance: 1.4
    PLA PolyLite Azure Blue Transmission Distance: 3.4
    PLA PolyLite Red Transmission Distance: 4.4
    PLA PolyLite Aqua Blue Transmission Distance: 3.3
    PLA BambuLab Basic Jade White Transmission Distance: 5.7
    PLA BambuLab Basic Orange Transmission Distance: 5.2
    PLA BambuLab Basic Yellow Transmission Distance: 5.2
This print uses 8 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Brown
    At layer #17 (1.44mm) swap to Azure Blue
    At layer #22 (1.84mm) swap to Red
    At layer #28 (2.32mm) swap to Aqua Blue
    At layer #33 (2.72mm) swap to Jade White
    At layer #35 (2.88mm) swap to Orange
    At layer #40 (3.28mm) swap to Yellow
    At layer #45 (3.68mm) swap to Jade White for the rest.

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Descrição