A big thanks and credit to the original author of the box model: Small Parts Storage Box w/Gridfinity tray
There is a great description of the entire box.

From the outside, my model is a very accurate remix of the original model, so you can use all the storage and gear that was created for this box.

Which means you can incorporate the boxes into your Gridfinity system.You can find the Try you need with the original model, and since I'm not changing anything on it, you'll find it there.

When I saw that someone had remixed the original model into an Opening model, I was delighted. Unfortunately, this remix changes the shapes (in my humble opinion) for the worse. For example, the fact that there is no radius inside means worse removal of the small part. 

So, that's why I made this for myself, and since I have it…

The box is 70x70x25mm in base dimensions. you will also find a 1.5x raised and a 2x raised.

It's not printed in place. Two parts connected by a piece of filament as an axis

Assembly: you will need 60mm of filament, insert this as the axis of the joint:

Done.

Edit 2025 01 15:

I've added a print profile for the translucent cap. Warning: really slow printing. based on the information in the BambuLab Wiki. The filament used at the top of the page.

Edit 2025 01 23:

Version 2 where there is only the axle version. The clamping was too hard for many...

Edit 2025 05 20:

Fixed error with dividers in 1x3 bottom

If you like my work, you can buy me a coffee