Summary

Make sure to look at the posted pictures on how to print the hilt.

This is a 1/1 scale replica of the Crucible from the Doom series. Included are two different versions. I recommend printing the blade in the red pla sparkle from Bambu

1. V1: Easiest to print. All parts have been tested and can be printed on the P1 and X1 series (for the hilt follow the 2 pictures included). This version is slightly less detailed.
2. V2 (if you are willing to give it some time and a little bit of trying I would honestly recommend this version more): This version will test your printing abilities (not really). The files are much more detailed and cleaned up and there is a super sweet hilt version (imo). I haven't actually printed any of this version.
3. I'm going to upload a blade that is compatible with the v2 file that has all the little runes like in the game.
4. Just uploaded a smaller version specifically for the A1 mini. Smaller printer=smaller blade overall. (v2 version so the blade is w/o engravings)

Please make me aware of any problems you are having. I won't hesitate to do my best to help. Happy printing all

Print Settings

Printer Brand: 

Bambulabs

Printer:                      

Bambu P1S

Rafts: 

No

Supports:                      

Yes

Resolution: 

0.012

Infill:                      

15% (but probably can be lower)

Filament: Anycubic/Bambu PLA
Black/Red(Sparkle)                    
                        

Notes:                     

Layer Hight of .2mm works well.

You really only need supports on the Handle 1 file.

Post-Printing

Depending on printer tolerance the blade might have some difficulty slotting in, and my need some persuasion (possibly a lot). For Hilt assembly I used a bit of cyanoacrylate super glue, and for the rest of the blade I pulled out the soldering iron with chisel tip attached and did a bit of pla welding.