Another tape measure spool.  This snap-together spinning tape measure spool has a spinning handle as well as the main spool section.

I recommend PETG or PETG-HF.  It may work but, I do not recommend PLA.  

If you want to print in PLA, and/or see the latest remix please see: 

Version 6 has been uploaded with a bigger crank handle and changed print orientation more suitable PLA (but recommend PETG) please find it here: 

[https://makerworld.com/en/models/1034323#profileId-1017787](https://makerworld.com/en/models/1034323#profileId-1017787)

Version 7 has been uploaded without a crank handle, suitable for PLA or PETG.
[https://makerworld.com/en/models/1299130-snap-together-tape-spool-version-7#profileId-1331095](https://makerworld.com/en/models/1299130-snap-together-tape-spool-version-7#profileId-1331095)

Previous UPDATE:

Now three different Print Profile versions uploaded for 17 mm or 20 mm wide tapes (20mm wide versions are available in Canada at Dollarama).

Version 5 

• Covered spool section;
• 2 options, with maximums of either:
  • 17mm; or 
  • 22 mm wide tape measures
• PETG recommended

Version 4

• for the larger 20 mm wide tapes
• slightly thicker walls than version 3
• PETG recommended

Version 3

• the original build that was published to MakerWorld, 
• 19mm high, or 22 mm high designed for 17 mm or 20 mm wide tapes respectively.  
• These heights do not include the spinning handle.
• Will probably fail in PLA, recommend PETG or stronger. 

All versions Snaps together (no glue), they have a spinning handle, no supports required to print,  If you only have PLA, please see the Version 6.