Project: EspadaDragon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 106.93x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA ESUN NEGRO Transmission Distance: 0.2
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with NEGRO
    At layer #6 (0.64mm) swap to Blue Gray
    At layer #11 (1.04mm) swap to Jade White for the rest.