This lets you use Sharpies to color the filament to any color you want. It works inline with the AMS or you can use it without it. I recommend to use clear filament and just insert a pause to change Sharpie colors. (unless your real fast.) You CAN use this with other filaments in the same print, just switch to the clear filament and add Sharpies. The part that is added on to the print head is just a quick release (credited below) and also adds stability.

In the picture of the stand, the green on the side is official Bambulab Translucent PETG, the green gears are clear PLA filament with green sharpies, and the corkscrew is White PLA with the same green sharpies.

I used a Supertack  to print this, it almost certainly won't print without one, but you're welcome to try. You also want to print REAL slow, like 50mm/s for everything including travel and slow down acceleration to 2000 or it'll fall over. Seriously, look at this thing. Supertack build plates are freakin' amazing!

3m countersunk screws go in the clips for strength.

ok, I'm terrible at modelling so this is made up of a bunch of models from other people and made compatible with The A1.

Credit goes to:

[https://thangs.com/designer/Make%20Anything/3d-model/Sharpie%20Marker%20Color%20Blender%20%2F%2F%203D%20Print%20Custom%20Colors%20and%20Gradients%20%28%203%20and%206%20marker%20version%20%29-912192](https://thangs.com/designer/Make%20Anything/3d-model/Sharpie%20Marker%20Color%20Blender%20%2F%2F%203D%20Print%20Custom%20Colors%20and%20Gradients%20%28%203%20and%206%20marker%20version%20%29-912192)

[https://makerworld.com/en/models/883661#profileId-838300](https://makerworld.com/en/models/883661#profileId-838300)

[https://makerworld.com/en/@TriBar](https://makerworld.com/en/@TriBar)